產品

GPD's Peel Back Force Tester with FORCEWARE™ software is being used to set peel back standards for the entire industry

Proven Peel Back Force Measurement
Supplying consistent SMT carrier packaging is critical for customers using SMT pick-and-place machines. Nothing will stop a production line faster than carrier cover tape that doesn’t peel back properly. The problem is difficult because tape cover adhesive varies widely from supplier to supplier.

 

In short, correctly measuring, setting up, recording, and then analyzing carrier tape peel back force is a critical production step. That’s why you need GPD’s Peel Back Force Tester (PBFT) with FORCEWare™ software. This is the equipment judged so good it was used to set the peel back force standard for the entire industry.

 

         

Installation and Set Up
Configuration of the PBFT is quick and easy using the PBFT calibration dial and the strain gauge calibration screen.

     

Strain Gauge Verification Kit
(part no. PBT-107)
This optional kit makes it easy to verify strain gauge calibration and meet ISO requirements for calibrated equipment.

 
  

FORCEWare™ Software

FORCEWare™ software allows the user to see, analyze, and record minimums, maximums, and average peel back force and speed, as well as standard deviation. GPD Global’s FORCEWare™ Software with comprehensive SPC Software Package makes testing and evaluation quick, easy, and accurate.

 

SPC Analysis

When sufficient SPC data has accumulated, it can be analyzed with any of the various window interfaces shown in the samples here. All you have to do is select the file to be analyzed, a data range, and the type of graph desired. Then simply print out or display the output. 

 

     

PBFT Control Center Window
The PBFT Control Center Window is used to define test parameters and unit of measure, run a test, and view, print, and save results. This window is also used to view and compare prior test results.

    

SPC User Creation Window

    

Test Graph

Now the most accurate method of testing is also the easiest and fastest. With easy to use, point-and-click windows, initial set up is a breeze, and calibration routines for both speed and force are practically automatic. SPC analysis allows the operator to select the files to be analyzed, and pick the appropriate analysis tools. Analysis, and all management results can be printed out for further study or distribution.

• Simplified calibration routine for speed and force
• Selectable sampling rate
• Bright, clear, easy-to-read screens
• Large storage capability for test data, test graphics, and SPC data

SPC Reports and Labels
SPC test results can be printed in SPC data, line graph, and label formats. The user can control the overall dimensions for all of these formats. User-defined print can also be added at the bottom of the SPC data and line graphs reports.

    

Previous Results Chart
This display is used to load previous results and past tests, in addition to generating additional results output.

    

S-Chart, X-Bar Chart, R Chart, and Cpk
Displays trends in spread of standard deviation, mean, range, and Cpk.

Features of the variable speed Peel Back Force Tester with FORCEWare™ software package

      
Build in Compliance With:
- IEC (Europe)
- EIA-J (Japan, Asia)

- EIA (North America): EIA-481-1, EIA-481-2, EIA-481-3
- European CE Safety Standards

Applicable Directives:
2006/95/EC Low Voltage Directive
Laws for electrical equipment within certain voltage limits