製品

ATOM cleaning device to remove static electricity and dust of circuit boards, molded components, and during powdering work.

Features:

1. Clean blower air with HEPA filters

• Clean air with 99.97% of particles of 0.3µm retained by the filter. (Maximum: 25m/s of wind speed, 1.5m³/min of air flow)
• Acrylic resin plate, preventing diffusion of air in the front of the product. (Removable)

2. Installation of DC ionizer and creation of neutralization area

• A space 270W x 270D x 250H(mm) is ''uncharged".
• The ion balance can be adjusted and the needle electrode can be replaced.
• Warning lamp for high voltage error.

3. Air blow speed can be adjusted

• The amplitude of the wind speed is displayed by a 12-stage LED indicator. This is also a guide for replacing the HEPA filter.
• Minimize this will produce a nearly wind-free state, so it can be used for powder work that is not likely to splash

4. LED illumination

• Lightens your works brightly with LED lamps that can also be used as operating lamps.
  
   

5. Put the product on the wall surface

• No protrusions or power terminals installed on the back of the device. You can use the workbench space effectively.

6. Air circulation type, with no exhausted air

• The Air is vacuumed up from the pre-filter at the back of the booth passing through the inside blower and is filtered by the HEPA filter, then is blown back from the top of the booth.

 
Performance Data

• Static elimination performance/noise/wind speed
  

  LED Level	Decay Time		Ion Balance (±V)	Noise (dBA)	Wind Speed (m/s)
  	Negative (sec.)	Positive (sec.)
  1	1.4	1.2	10	52.3	0
  3	0.3	0.3	10	52.3	1.0
  6	0.2	0.2	10	55	2.0
  9	0.2	0.2	10	60	3.0
  12	0.2	0.1	10	68	4.0
  12(max.)	0.1	0.1	10	73.3	7.0

  Measured on April 12. 2018 at 25ºC (temperature) and 45%RH (humidity).
  Decay time. Ion Balance measured with "TREK 158" CPM at 100mm distance from the air outlet.
  Noise measured with "SL-1320" at 1m front.
  Airflow velocity measured with "SK-93F" just below the air outlet.  

• Air cleanliness (HEPA filters)<99.9% or more>
  

  Particle	0.3µm	0.5µm	5µm	Total
  Primary Side	16,165,100	4,884,000	0	21,049,100
  Secondary Side	420	0	0	420

  Measured on April 13, 2018
  Airflow: Max
  Tested particle: PAO (Polyalphaolefin mist)
  Particulate measured with KC-01DI (primary side, after air passing through the blower) and KC-03B (secondary side, after passing through the HEPA filter)

• Dust Removal Test

Sample: Bakelite plate (150 x 90 mm, 3 mm thick)
Pseudo-contaminant: cotton linter
Static elimination time: 3 seconds (inclined at 45° with respect to the air outlet)

Measured on April 11, 2018 with Electrostatic Field Meter Eye-02, at Max Wind Speed at 26ºC (temperature) and 45%RH {humidity)

Dimensions
No. APC-250CR
EDP NO.623201

Applications (Static elimination and dust removal)

• For decomposition and repair of mobile phones and small electronic devices
• Before assembly of various receiving components
• Products before UV processing and silk printing
• Plastic moldings
• Glass substrates and semiconductor devices
• Before product packaging

    
unit: mm

Specifications

Ionizer

Maintenance time *It depends on usage conditions.

Application